Trade in Iseki for 2810

   / Trade in Iseki for 2810 #1  

DavidD

Silver Member
Joined
Jun 4, 2002
Messages
107
Location
Oklahoma
Tractor
Mahindra 1626
I am seriously thinking about trading my iseki in on a Mahindra 2810. The Mahindra is quite a bit bigger but I think I can get used to it. I have four foot implements ie: boxblade, brushhog, and a five foot tiller. I'm pretty sure the 5 ft tiller will be OK, but , how impractical would it be to try to use my 4 ft brushhog with the 2810? Should I try to swing an implement trade too?
 
   / Trade in Iseki for 2810 #2  
Well, I have a 2810HST and the width of the rear tires is nearly 5 1/2ft. and I'm having no problems with a 6ft. brush hog on it. If you can't cover the width of your tires then you won't get up close to a fence line and such.
 
   / Trade in Iseki for 2810 #3  
The HST is a much bigger tractor than a 2810 granted they both have the same motor.
 
   / Trade in Iseki for 2810 #4  
One interesting bit of information. If you trade your Iseki for a Mahrinda 2810, you will still have half of a Iseki. From the engine back, the Mahrinda is an Iseki as is the MF (Iseki's) 1200"s.
 

Tractor & Equipment Auctions

2001 Chevrolet Tahoe SUV (A50324)
2001 Chevrolet...
TEST YOUR BID BUTTON! (A51242)
TEST YOUR BID...
2013 Nissan Sentra Sedan (A50324)
2013 Nissan Sentra...
2014 Doosan DA30 (A52128)
2014 Doosan DA30...
2022 CATERPILLAR D4 LGP CRAWLER DOZER (A51242)
2022 CATERPILLAR...
KSI Conveyor (A52128)
KSI Conveyor (A52128)
 
Top