trailer for JD 3033R
- Thread starter Corkpuller
- Start date
- Views: 5257
two_bit_score
Super Star Member
- Joined
- Dec 22, 2008
- Messages
- 12,412
- Tractor
- John Deere 110 TLB, Diamond C 19LPX GN trailer
Is it a tilt trailer?
cathy liebchen
Platinum Member
A 20 foot 10k tandem equipment trailer with electric brakes on both axles is what you need. No one ever said they wished their trailer was shorter
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,947
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
He only intends on hauling the tractor very sparingly. I’d hate to be dragging around a 18’ 10k trailer for other choirs.
Spindifferent
Gold Member
No, I have an 18 foot car hauler with a dovetail and ramps.
Fallon
Super Member
I'm happy with my 22' deckover power tilt Diamond C. I upgraded from a 16' gravity tilt. Steel deck & 7k axles. Got it used at an auction, small local OEM. I assumed I was upgrading to another longer & nicer gravity tilt, but went another way. A gravity tilt loads a vehicle much nicer. No ramps, low angles, nice. But if you have any impliments (or machines) over 81-83", you have fender clearance issues. The back 10-20% of the deck isnt usable due to balance issues (deck needs to pivot dead center & that has to be between the axles). Can be resolved a bit with a small fixed deck up front. But the killer for me was loading other stuff. Fenders just got in the way. So I ended up with the deckover power tilt.
Deck angle is a lot steeper & a bit of a pain. The extra height makes chaining a little harder at times. Despite 80% of my hauling being the tractor I'd still go with the deckover though.