Transfer Tank

/ Transfer Tank
  • Thread Starter
#41  
Well here it is. Not the best lookin set up, but fully functional and painted red to match the tractor.

1st pic - is tank sitting on skid. I also put treated 4x4s under it so I can set it on ground and do not have to worry about the steel rusting out.

2nd pic - pump mounted and plumbed. Notice fuel can behind tank. There is enough room I can put three 5 gallon fuel cans back there.

3rd pic - filter house bracing. I put this here to keep filter from sagging.

4th pic - complete unit.

5th pic - putting it in back of pick up.

6th pic - ready to be filled up, but first we will have to sit on the street corner and take fuel donations.

7th pic - right before we put it in back of F250 and scratched the new paint on it.... :eek:

2012-10-29 15.30.15.jpg2012-10-29 17.42.11.jpg2012-10-29 17.39.56.jpg2012-10-30 09.54.59.jpg2012-10-30 11.08.15.jpg2012-10-30 11.10.54.jpg

2012-10-30 11.01.59.jpg
 
/ Transfer Tank #42  
WOW....that is AWESOME!!!!

Really nice work on the project, as for your comment "not the best lookin' setup" - I tell you, take pride in that! Beauty is in the eye of the beholder- you built it the way you wanted it.

Besides- it IS a good looking setup.
 
/ Transfer Tank #43  
Awesome -- nice work!
 
/ Transfer Tank
  • Thread Starter
#44  
WOW....that is AWESOME!!!!

Really nice work on the project, as for your comment "not the best lookin' setup" - I tell you, take pride in that! Beauty is in the eye of the beholder- you built it the way you wanted it.

Besides- it IS a good looking setup.

THANX!!
 
/ Transfer Tank #46  
Very nice...

I would find some type of rubber covering for that fuel nozzle. Nothing attracts dirt like diesel fuel.
 
/ Transfer Tank #48  
Very nice...

I would find some type of rubber covering for that fuel nozzle. Nothing attracts dirt like diesel fuel.

I used a 4" long piece of white PVC pipe with a cap glued on one end. It fits nice and tight.


Chris
 
/ Transfer Tank
  • Thread Starter
#50  
Someone asked or I guess I could say sent me a PM about the pump I used so I thought I would put the link here > Harbor Freight Pump.
 

Marketplace Items

2018 GENIE GS-2632 ELECTRIC SCISSOR LIFT (A62129)
2018 GENIE GS-2632...
2024 ANKONA 54" HANG-ON WHEEL LOADER FORKS (A62129)
2024 ANKONA 54"...
1999 INTERNATIONAL4700LPX 4X2 BOX TRUCK (A59908)
1999...
2010 John Deere 1770NT Planter (A63109)
2010 John Deere...
UNUSED KUBOTA BRACKETS (A62130)
UNUSED KUBOTA...
UNUSED KJ 20' BI PARTING GALVANIZED GATE (A62131)
UNUSED KJ 20' BI...
 
Top