Dealer trying to become a dealer

   / trying to become a dealer #1  

mike949799

New member
Joined
Sep 19, 2006
Messages
4
Location
Connecticut
does anyone know how i can become a jinma dealer? i would also like to sell the small dozers to. who do i contact.i already have a good sized shop
 
   / trying to become a dealer #2  
You might want to contact Homier or one of the larger Jinma distributers vs going your own with direct import from china.
 
   / trying to become a dealer
  • Thread Starter
#3  
JohnS said:
You might want to contact Homier or one of the larger Jinma distributers vs going your own with direct import from china.

whos a distributor. i can't locate anyone
 
   / trying to become a dealer #5  
Or you could contact an exporting agent in China. This would be the cheapest source for your product so your potential for profit is much higher....however, depending on the integrity of the agent and the logistics of getting the product safely into the country, your risk for ecomonic loss is also much greater. Do some research and crunch the numbers. Then ask yourself if you really want the headaches of starting your own business. Remember, the vast majority of small businesses fail. Isn't that an optimistic thought.

K
 
   / trying to become a dealer
  • Thread Starter
#6  
CajunFrog said:
Or you could contact an exporting agent in China. This would be the cheapest source for your product so your potential for profit is much higher....however, depending on the integrity of the agent and the logistics of getting the product safely into the country, your risk for ecomonic loss is also much greater. Do some research and crunch the numbers. Then ask yourself if you really want the headaches of starting your own business. Remember, the vast majority of small businesses fail. Isn't that an optimistic thought.

K

I already have a small business and know all about the headaches. i wanna start something new because my business is really boring and I don't work in the winter unless it snows. i would be happy selling jinma,montana or even a big name like new holland or kioti
 
   / trying to become a dealer #7  
Along with Chip, talk with Tommy at Affordable or Bolton Power. Call them on the phone, I bet they talk much more than they write! ;) China Importers has allot of good dealers on their lists.
 
   / trying to become a dealer #8  
One of these days John when I finally meet you I'll feed you beer within an inch of your life. :^)))))

Cheers
Graham
 
   / trying to become a dealer #9  
Graham, in that case, we might meet very soon! :) But, to really top it off, a fresh lobster dinner with steamed clams, small red salt potatoes, a little slaw, and corn on the cob,would do it!! ahhhh! :) :) :)

Hey, if you want to learn the best trail through the wild west of chinesse tractors, better talk with the early pioneers, the ones with the arrows in their back! :)
 
Last edited:
   / trying to become a dealer #10  
Think of all the legal exposure. This a law sueing happy world. If you feel like supporting your local lawyer. I know, I know I'm a synicte, and I probably being labeled as being negative. But you know what it's like tryin' to keep a tractor running for a fellow who has no business owning any kind of machinery. I do feel for the dealer who been able to survive. I know there's scares to prove where the been tryin' to deal fairly with the public... My Two Cents. bjr
 

Tractor & Equipment Auctions

2015 Ford Escape AWD SUV (A50324)
2015 Ford Escape...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
LIKE NEW 2023 Rhino 84in Reverse Rotation Rotary Tiller (A52748)
LIKE NEW 2023...
2008 INTERNATIONAL MA025 REEFER BOX TRUCK (A52577)
2008 INTERNATIONAL...
2017 TRANSCRAFT TANDEM AXLE DROP DECK TRAILER (A52576)
2017 TRANSCRAFT...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top