TS 1610 charging circuit

   / TS 1610 charging circuit #1  

eppoh

New member
Joined
May 15, 2013
Messages
21
Location
Texas
Tractor
Iseki TS1610
Does anyone know if the key switch on the TS 1610 must be to the "on" that is to the right position, for the charging circuit to be energized? I mow only during daylight and don't want to run the lights.
 
   / TS 1610 charging circuit #2  
On the TS1610 there are three on positions for the key "on electrical power on", "on with lights on high beam" and "on with lights on low beam". So you should be able to operate the tractor with the key on and the lights off. I think it will charge with the key in the off position, but the operator manual says not to do that. The operator manual does not say why this shouldn't be done, but I think it is because with the key in the off position the warning lights for water temperature, oil pressure and alternator may not work.

Electrical power on with the lights off should be the first position of the key next to off.
 

Tractor & Equipment Auctions

2013 International DuraStar 4300 Crew Cab Mason Dump Truck (A51692)
2013 International...
Industrias America F10 (A56469)
Industrias America...
2015 FONTAINE 53 DROP DECK (A55745)
2015 FONTAINE 53...
2016 CATERPILLAR CB34B SMOOTH DBL DRUM ROLLER (A52707)
2016 CATERPILLAR...
UNUSED FUTURE D3T 32" HYD TILT BUCKET (A57193)
UNUSED FUTURE D3T...
2017 INTERNATIONAL 4300 21FT BOX TRUCK (A57880)
2017 INTERNATIONAL...
 
Top