mudcat
Platinum Member
Has anyone had any experiance with Tractor Supply Company's 3pt quick hitches? Does it really make that much easier to change implements? Are there any load limits? Any info on it would be helpfull.
TSC quick hitches?
- Thread starter mudcat
- Start date
- Views: 1884
JasonL
Silver Member
mudcat-
I have TSC's Cat 1 Speeco quick hitch, and yes it does really help. Several things to remember- some attachments may not work without modifications, the hitch will move attachments back several inches which can affect your pto shafts, a plus is it will allow you to raise implements higher. I don't know about load limits, but it looks heavy enough to handle anything my tractor can lift. I would buy one again in a heartbeat. Also, you have to buy bushings for your implements to get them to Cat 3. Do some searches here on TBN as everything I have said has been said before and probably better. Jason
I have TSC's Cat 1 Speeco quick hitch, and yes it does really help. Several things to remember- some attachments may not work without modifications, the hitch will move attachments back several inches which can affect your pto shafts, a plus is it will allow you to raise implements higher. I don't know about load limits, but it looks heavy enough to handle anything my tractor can lift. I would buy one again in a heartbeat. Also, you have to buy bushings for your implements to get them to Cat 3. Do some searches here on TBN as everything I have said has been said before and probably better. Jason
jim_wilson
Veteran Member
- Joined
- Jun 13, 2004
- Messages
- 1,794
- Location
- Northeast MA
- Tractor
- Kubota B3200 w/ BH77 & 12", 18" & 24" buckets, Kubota B50 SSQA w/ 54" & 60" buckets, LandPride FDR1660, Artillian Fork frame, Extreme 3pt rake, Concrete Mixer, MyTractorTools grapple adapter
I have a Speeco quick hitch on my BX23 and it makes attaching implements MUCH easier. Definitely a good purchase. You will however have to make sure that all of your implements will fit or can be modified to fit. I had to cut away a little bit of the quick hitch to get my Woods box blade to fit properly for instance.
Attachments
hbaird
Silver Member
I have an EZ Hitch as advertised on this site. It is great. I would recommend it to anyone. It took a while to get mounted and adjusted but it saves me a lot of hassle.
Harold
Harold
deere_x475guy
Gold Member
I bought one last year from TSC and wouldn't be without it. Like the others have said you may have to do some modifications to make it work with all your implements. So far the only thing it will not work with is my post hole digger and doubt there is any QH that would work.