Steve HEF
Member
- Joined
- Apr 21, 2011
- Messages
- 28
- Location
- LaGrangevill, N.Y.
- Tractor
- New Holland 3930, New Holland 2910, Ford 445
I have two tractors at work, a Ford 2910 and New Holland 3930, both are 4x4. The 2910 I believe is a 1981 model. The turning radius on this thing is ridiculously wide, I've never used a tractor that is this bad before. The 3930 will turn in half the radius of the 2910. Both appear to have very similar front axles, there's only a couple casting tangs that are different. Is there any reason I can't adjust the bump stops on the steering spindles to allow it to turn tighter? Thanks.