Two seater tractor

[turboblue46]

Can anyone tell me who makes the two seater tractor? I have seen one of these offered on Ebay a while back. But I can't recall who made it. It has a three point hitch and pto. Mike

 

[YanmarFever]

hinomoto JF1 22 hp. 4x4
I have one in the barn I restored last year
Ernies Imports

 

[Cliff_Johns]

</font><font color="blue" class="small">( hinomoto JF1 22 hp. 4x4
I have one in the barn I restored last year
Ernies Imports )</font>


Oooh. Can we see a picture?
Cliff

 

[YanmarFever]

Click here

 

[Cliff_Johns]

Thank you, I guess I saw that thread and didn't remember that was you posting. Like I said in that thread. That's a pretty neat tractor.
Cliff

 

[turboblue46]

Yep!!! Thats the one. Thanks for the info.

 

[Cabinholler]

tractorErnie

That is one cool looking machine.

Cabinholler

 

[LBrown59]

</font><font color="blueclass=small">( hinomoto JF1 22 hp. 4x4
I have one in the barn I restored last year
Ernies Imports )</font>

============
The PICTURE is worth a 1000 words!

 

[jonE15]

Ernie,
You seem like the guy that would know this....Where is the trans filter located on a Hinomoto E15?
Having issues with the loader making a screeching noice under load and going very slowly. Any ideas?
Thanks,
Jonrscott@yahoo.com

 

[YanmarFever]

jonE15

I have only one hinomoto and thats the 2 seater car one.
Please ask leonard sheaffer he would know where the filter is.
How about if you just follow the 1" return line from the hyd. pump to the rear of the tractor, and see if its located on the end of it like most japanese tractor have.
sorry but thats all I know about hinos.
what state are you in?
Ernie

 

[jonE15]

I am in Texas, near Dallas.
Well I finally found the filter around on the opposite side of the tractor from the return line behind a plate that was hidden. The filter was "plum full" of junk!! Clean it with some gas, reinstalled, filled with some new fluid and now it works like a champ! Thanks to all for your help!!
Jon

 

[kayssupply]

I had a loader- backhoe doing that one time. I had hit the 3 point lever and the system was in a constant bind. When I tied the lever in the off position it never happened again.