Type of oil for front axle on 4320
- Thread starter bth
- Start date
- Views: 17805
dsgsr
Platinum Member
- Joined
- Feb 16, 2001
- Messages
- 507
- Location
- Monroe, Maine
- Tractor
- Kubota M59 ,Takeuchi TB175 Excavator, TD7 Dozer, 2 dumptrucks, Northlander Sawmill
On my 4700 it is the same as the Hydro oil, Low Visc. Hy guard.
David
David
dsgsr
Platinum Member
- Joined
- Feb 16, 2001
- Messages
- 507
- Location
- Monroe, Maine
- Tractor
- Kubota M59 ,Takeuchi TB175 Excavator, TD7 Dozer, 2 dumptrucks, Northlander Sawmill
On my 4700 it is the same as the Hydro oil, Low Visc. Hy guard.
David
David
755inNY
Platinum Member
- Joined
- Jul 4, 2003
- Messages
- 530
- Tractor
- JD 4310, ehydro, 4WD, R4s
bth,
This seems to be a common problem. Your answer is in the first 2 paragraphs in the Service Transmission section of your manual. It is located in the section before the subsection titled Checking Front Axle Oil Level.
The recommended oil is Hy-Gard, either standard or Low Viscosity depending on the expected air temperature.
This was confusing for me as well for my JD 4310. The wording in the 4310 manual is the same. The reference to the recommended oil means the oil specified at the beginning of the Service Transmission section.
Jeff
This seems to be a common problem. Your answer is in the first 2 paragraphs in the Service Transmission section of your manual. It is located in the section before the subsection titled Checking Front Axle Oil Level.
The recommended oil is Hy-Gard, either standard or Low Viscosity depending on the expected air temperature.
This was confusing for me as well for my JD 4310. The wording in the 4310 manual is the same. The reference to the recommended oil means the oil specified at the beginning of the Service Transmission section.
Jeff
755inNY
Platinum Member
- Joined
- Jul 4, 2003
- Messages
- 530
- Tractor
- JD 4310, ehydro, 4WD, R4s
bth,
This seems to be a common problem. Your answer is in the first 2 paragraphs in the Service Transmission section of your manual. It is located in the section before the subsection titled Checking Front Axle Oil Level.
The recommended oil is Hy-Gard, either standard or Low Viscosity depending on the expected air temperature.
This was confusing for me as well for my JD 4310. The wording in the 4310 manual is the same. The reference to the recommended oil means the oil specified at the beginning of the Service Transmission section.
Jeff
This seems to be a common problem. Your answer is in the first 2 paragraphs in the Service Transmission section of your manual. It is located in the section before the subsection titled Checking Front Axle Oil Level.
The recommended oil is Hy-Gard, either standard or Low Viscosity depending on the expected air temperature.
This was confusing for me as well for my JD 4310. The wording in the 4310 manual is the same. The reference to the recommended oil means the oil specified at the beginning of the Service Transmission section.
Jeff
