groundcover
Elite Member
Got a piece of chain link fence you could drag behind the rake to help level off the high spots?
Undulations when raking?
- Thread starter Rakemania
- Start date
- Views: 1478
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 14,049
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
Angling your rake may help a bit.
OP
Rakemania
New member
Yeah tried that didnt really change the problem, but thanks for thought.
oosik
Epic Contributor
I think by combining several of the suggestions you could get a fairly leveling effect. The up/down actions of the front wheels are amplified by the position of the top link. Try running without the top link attached or with a chunk of chain in place of the top link. Make a bridle and drag a section of chain link fence behind the rake.
That is probably going to give you the best situation without spending quite a bit on such as a set of gauge wheels.
That is probably going to give you the best situation without spending quite a bit on such as a set of gauge wheels.
JJT
Veteran Member
- Joined
- Oct 13, 2001
- Messages
- 2,052
- Location
- Upstate NY, USA
- Tractor
- Kubota L3710 HST and a Kubota ZD21 60Pro
Gauge wheels and slow down. I've been maintaining an 800' gravel driveway for 20+ years and have raked dozes of acres of raw ground prepping for grass seed.
