Up to wich angle can I go with a CK20

[tony123]

**** Dirt!

Mine are much less than that, and my stomach can't handle it.

 

[Bigboyskioti]

I have the same machine you do. And about the same ditch that you do. The ditch along my drive does get pretty bad at one point. I drive parallel with the drive until the "Pucker Factor" kicks in. Then I back down, pull out, move over and continue to get it done. Take the advice of the others and only do what you are comfortable with. You'll know when it to bad. If your tires are loaded then I'd say keep the loader on and low to the ground. Low range to go slow. And keep it in 4 wheel drive to aid in traction. But be safe!

 

[RoyJackson]

If your tires are loaded then I'd say keep the loader on and low to the ground. Low range to go slow. And keep it in 4 wheel drive to aid in traction. But be safe!

You gents are forgetting about all the weight of the loader frame above the axle. Believe me...operating on a side slope without that weight is much safer and more comfortable then having that weight on the machine.
If you haven't tried it yet...do so...I think you'd change your minds.