That is what I'm afraid of! I run 1/8-inch 6010 around 80-amps on the V350-Pro to get the same results on the Stickweld 250 I was a little over 120-amps! Furu will probably have the exact numbers. To me that is just way to big of a difference!
Lanse I really look forward to what you find out.
The Lincoln V350-Pro with ESAB 10P Plus 1/8" was at 80 amps and I think AF was around +2.4 or so.
The Stickweld with same rod (ESAB 10P Plus 1/8") was at 125 amps AF 5; thus the 45 amp difference.
My memory of the V350-Pro Arc Force setting may be off a bit as I did not log that as we were looking at several things with the range of the AF on the machine.