Updated list of Service Manual + Part Books

[M&M Mules and Packing]

I'm looking for a Branson 10 series service manual for my 2610H. I need a wiring diagram to help me chase down an intermittent issue causing the gauges to fail and the engine to stall.

 

[Asteral]

I'm looking for a Branson 10 series service manual for my 2610H. I need a wiring diagram to help me chase down an intermittent issue causing the gauges to fail and the engine to stall.

24002510 service manual.pdf - this is the most up to date manual i have for the 00/10 series models

 

[M&M Mules and Packing]

OK, this looks great. Thanks!

 

[tambs]

Looking for a current model (2022) 20-Series Service Manual, and a parts manual if anyone has a link. Dealer said he could order a service manual for me, but they cost $300. Yikes!

 

[zepsherlock]

@tambs I think there are a few of us still hoping to see this come through @Asteral updated the original post a little while back saying he had heard from Branson that they are almost done working on the manual. I can believe it's been almost 2 years in the making at this point, but I hear there are so many changes from the pre-2020 models it's been taking a long time to get it made. I'm surprised the dealer even said they could get you one, they might just be assuming since I don't think anyone can get them yet.

 

[Asteral]

@zepsherlock you're absolutely correct the 2020-2023 manual is still in the works, they keep telling us we will have it soon but they've also been saying this for about a year so we will see, i would advise against purchasing that manual as they were probably going to sell you the tier 4 20 series manual and you can grab that download from the links i have provided

 

[jakkranch]

*** 20 series service manual - i finally got an update from branson about when this would be available, they have the final iteration back and are going over it now for typos and the like once they are done with that the will be publishing it in pdf format for us dealers to be able to give out to or customers, i will update with the link as soon as i have it.***

***NEW UPDATE*** WELL IT TOOK THEM LONG ENOUGH BUT HERE IT IS EVERYONE THE 4 RANGE 2021+ 20 SERIES SERVICE MANUAL - 20S RANGE4 2021-2022.pdf

**UPDATE** 5835R PARTS BOOK - 5835R.pdf

*UPDATE* i now have the new 2020+ 15 series service manual this will apply to both the K models and us 15 series cab and non cab versions - should have the new 20 series soon but there were so many changes on that model that's it taking way longer than it should to be made current version( i don't have access to this, i wish i did)
is sitting at around 1200 pages thus far and counting, but as soon as i can get my hands on a copy i'll post it here as well.

15 SERIES 20+ MANUAL.pdf

drive.google.com

OK guys after much back and forth with Google, I've had to create an entirely new google drive account to be able to reupload this.

Part Books For Branson Equipment - Google Drive - part books

Servicing Manuals for Branson - Google Drive - servicing and operating manuals

if you find i have missed something i had posted before please let me know and I'll get it up asap - and i hope to have the new series 15/20 models manuals soon

Thanks this is fantastic

 

[cscollin]

Looks like the manuals for the 25 series are missing on the links that Asteral provided.

I checked what I had on my computer for the 25 series and uploaded to the Google Drive temporarily. Here is the link, let me know if it's working or not.

Branson 25 series - Google Drive

drive.google.com

The link for the parts manual on the 25 series quit working again. Could someone provide the parts manual so I could download it please? I have a 3725.

 

[Asteral]

The link for the parts manual on the 25 series quit working again. Could someone provide the parts manual so I could download it please? I have a 3725.

this should be the most updated version

3725CH.pdf

drive.google.com

 

[cscollin]

this should be the most updated version

3725CH.pdf

drive.google.com

Thanks pal.

 

[S_Hudd]

Thx Asteral. Would you all believe there is no mention of a switch (toggle) for PTO engagement in my Branson Operators manual.... One broken PTO shaft later, I think I found it. My mistake, too high RPM and happy the PTO to the brush hog/Slasher gave out with no damage to the Tractor. You guys are amazing...

***NEW UPDATE*** WELL IT TOOK THEM LONG ENOUGH BUT HERE IT IS EVERYONE THE 4 RANGE 2021+ 20 SERIES SERVICE MANUAL - 20S RANGE4 2021-2022.pdf

**UPDATE** 5835R PARTS BOOK - 5835R.pdf

*UPDATE* i now have the new 2020+ 15 series service manual this will apply to both the K models and us 15 series cab and non cab versions - should have the new 20 series soon but there were so many changes on that model that's it taking way longer than it should to be made current version( i don't have access to this, i wish i did)
is sitting at around 1200 pages thus far and counting, but as soon as i can get my hands on a copy i'll post it here as well.

15 SERIES 20+ MANUAL.pdf

drive.google.com

OK guys after much back and forth with Google, I've had to create an entirely new google drive account to be able to reupload this.

Part Books For Branson Equipment - Google Drive - part books

Servicing Manuals for Branson - Google Drive - servicing and operating manuals

if you find i have missed something i had posted before please let me know and I'll get it up asap - and i hope to have the new series 15/20 models manuals soon

nks

 

[ericm979]

My 3725 has a three position PTO switch. Off, independent and linked. Linked is also switched by a position switch on the 3pt hitch. The idea is that it shuts off the PTO when you raise the implement and turns it back on when you lower it. Independent is just off and on.

I try to always use the throttle to slow down the implement (I have a chipper with a 200lb flywheel) and engage the implement with the engine at idle. If you turn off the PTO with the engine at speed the PTO brake is used to slow the implement. Eventually it will wear. And you found out what happens when you engage the implement with the engine at speed, though the usual problem is just increased wear on the PTO clutch.

But with all that I have not found a use for the linked position on the switch.

 

[S_Hudd]

Thanks Eric. Much appreciated. Yes. Thats it. I couldn't work out the symbols... The machine is tough, just takes a bit of me using it with some smarts in engaging it at idle etc. as you mentioned above, and work it out without breaking any more PTO's or worse/gears!! Mine on the 4720i has an off in the middle and a symbol to the left and one to the right.. I think left its independent/right its linked... I'll work it out.. Found it in the parts manuals posted on here... I think!

 

[Slowpoke Slim]

I have used my linked position a few times when picking up my brush hog at the end of a row. That's about it for me, I don't have a tiller (yet).

 

[esz]

Thank you for posting these. I have a 2022 2515R(H) but figure the 3015H is close enough.

 

[Asteral]

Thank you for posting these. I have a 2022 2515R(H) but figure the 3015H is close enough.

I'M NOT SURE WHICH ONE YOU DOWNLOADED BUT THIS ONE IS THE MOST ACCURATE TO YOUR MODEL

15 SERIES 2020 MANUAL.pdf

drive.google.com

 

[esz]

Thank you

 

[Moak]

Does anyone have a service manual for the 2610H

 

[Asteral]

Does anyone have a service manual for the 2610H

24002510 service manual.pdf

drive.google.com

this is the only version i have for that series, it wont be an exact match but it should be close enough to help guide you along

 

[oldnslo]

Asteral
Is there a manual for the engine used on the 2400H. I have the chasis manual and it states to look in engine manual for engine specific items. I apologize if you already posted this.