casingbill
Bronze Member
- Joined
- Apr 30, 2005
- Messages
- 52
Does anyone know of any place that has used parts for a NH 1920? Dealer wants over 300 just for a grill!!
Used parts???for 1920
- Thread starter casingbill
- Start date
- Views: 943
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Try wengers.com they do alot of parting out.
So.. come off the story.. how'd ya kill the grill.
When i had my 1920.. I used angle iron and perfed metal and make a grill guard that bolted to the front bumper and covered my grill 3/4 the way up. Had just enough clearance to flip the hood back.
Once you get the new grill.. consider making a guard. I made mine out of scrap angle iron and flat from the scrap pile at work, and a pice of perferated metal.. also from scrap and couple welding rods on an old tombstone welder. Wire wheeled it down, and hit it with some NH blue paint and then used the plasma cutter to blow bolt holes in the bottom flange of the guard to coinside with the holes that are already in the NH oem bumper. With this guard.. you could still hang 2 o fthe fat NH weights.. one on either side..etc.
soundguy
So.. come off the story.. how'd ya kill the grill.
When i had my 1920.. I used angle iron and perfed metal and make a grill guard that bolted to the front bumper and covered my grill 3/4 the way up. Had just enough clearance to flip the hood back.
Once you get the new grill.. consider making a guard. I made mine out of scrap angle iron and flat from the scrap pile at work, and a pice of perferated metal.. also from scrap and couple welding rods on an old tombstone welder. Wire wheeled it down, and hit it with some NH blue paint and then used the plasma cutter to blow bolt holes in the bottom flange of the guard to coinside with the holes that are already in the NH oem bumper. With this guard.. you could still hang 2 o fthe fat NH weights.. one on either side..etc.
soundguy
OP
casingbill
Bronze Member
- Joined
- Apr 30, 2005
- Messages
- 52
Soundguy, I did find wengers after some searching, but they don't have one. I just got the tractor though, so I didn't get the pleasure of smashing the grill...lol. It needs a couple of little parts, but only cause I think it does. thanks for the help.