Using a tractor for wireless Internet installation

[k0ua]

I'd like to switch out the cat5 with fiber someday, which would put an end to my lightning troubles. Something to think about if you have frequent thunderstorms.

Yep. Fiber is hard to beat to solve lightning problems.. A couple of things to remember, Not all locations have the same incidence or intensity of lightning. The next thing to remember is anytime you put copper into the ground, you have a lightning problem that needs to solved. Not all lightning protection devices are equal. Some are absolutely worthless. Some are so-so, and some (Transtector/Polyphaser) are the best. Just sayin.

 

[ishiboo]

Cool project!

Where I live, there is no DSL nor cable anywhere near enough to do what you have done.

However, there are a few line-of-sight wireless ISP's that have made a business out of serving customers like me using the same technology that you are using. At least one of the ISP's started as a few neighbors cooperating so they could have Internet other than dialup. Back then, they were using wifi to connect house-to-house.

The ISP I'm on now uses Ubiquity wireless equipment, as do I for my router and wifi AP. Ubiquity can't be beat for quality at a reasonable price.

One thought with respect to your project... I have a cat5 run between my house and barn. Despite grounded surge protectors at both ends, I've had equipment on that run fried due to lightning. (The surge protectors themselves were also fried.) These were not direct hits on my house, barn, or anything in-between; rather, they were near enough hits to cause a large potential across the cable.

I'd like to switch out the cat5 with fiber someday, which would put an end to my lightning troubles. Something to think about if you have frequent thunderstorms.

The surge protectors are basically a throw-away if something happens, yeah.

Fiber is an additional cost and no guarantee of protection. Reason being, the antenna still needs to be powered by something... which means a much larger copper path right back to the building's electrical system, with the capability to carry much more current. With proper grounding of the pole, grounded cable, multiple surge protectors per Ubiquiti guidelines for grounding, etc... the risk is eliminated just about as much as I can make it.

And while a 35' metal pole sounds like a great target, the barn nearby at 45' with 5' lightning protectors connected to ground is a pretty good target too Lightning is one of those things that does whatever the **** it wants though, it will on occasion strike right next to a building directly to the ground, it can branch out and affect stuff all over the place, etc. The shielded cable does do a pretty good job of preventing massive EMF from traveling all over the place and affecting equipment.

Yep. Fiber is hard to beat to solve lightning problems.. A couple of things to remember, Not all locations have the same incidence or intensity of lightning. The next thing to remember is anytime you put copper into the ground, you have a lightning problem that needs to solved. Not all lightning protection devices are equal. Some are absolutely worthless. Some are so-so, and some (Transtector/Polyphaser) are the best. Just sayin.

Definitely. This installation is to professional guidelines for tower installations, but it's still an additional risk.

 

[STx]

I've been trying to figure out a way to do something similar at our place. My options are a T1 at $600/mo, using my cell phone as an access point or Satellite Internet. I'm spoiled by the cable modems I have at the suburban house, more so by the unlimited data than by the speed, and need to figure out a way to do that there. We're only a few miles from town and since we're on top of a hill, line of sight wouldn't be a problem, so I need to see what is available in town and then see if I can rent a place to mount an antenna from someone. Since we still haven't sold the suburban home and made a permanent move, I haven't gotten too far into it.

As to the lightning, with several years of working on residential and small commercial sprinkler systems, I can tell you from first hand experience that anytime you have wire in the ground you have the potential for lightning damage, no matter what sort of grounding you do. 100% of the time the damage we repaired on sprinkler systems came from the field, not the household electric. Honestly, the 24V transformer for the controllers took the brunt of the force on the house side and protected the rest of the electrical from further damage. I had one job where the PVC mainline was shattered for about 8', I'm assuming it was where the lightning hit. So, unless you can power the antenna via a battery and solar charger, even fiber won't protect you fully and if you run power directly to it, you're going to need a serious surge suppressor to actually stop anything. Personally, I'd rather stick with the POE and sacrifice the antenna and POE switch than have to deal with a strike that got into the household wiring and fried everything or worse, started a fire.

 

[ishiboo]

Had 2 days of serious wind, one with a wind warning with 50+ gusts... all is well so far!

Hopefully no 90+mph days until I get a real foundation under it next spring.

 

[k0ua]

Had 2 days of serious wind, one with a wind warning with 50+ gusts... all is well so far!

Hopefully no 90+mph days until I get a real foundation under it next spring.

good deal, I was just concerned that the wood would break or the lags would pull out.. But if it held, then you are probably good to go until you can get the concrete in the ground.

 

[prevent]

Man, and i thought my parents had it bad. they're in IL serviced by a WI telephone company that offers 5mbps DSL or 7mbps DSL.

I go over there and be like "wtf is this the stone age" now days you can't live without the internet anymore, everything is based on it.

 

[woodlandfarms]

We get cable DSL at the city house, of course fast as all heck, the farm gets line of site at 10 down and 2 up. Not very good but better than nothing.

Was given a box of Cat-6. I know how to build cat 5 and do most of my own wiring so figured Cat-6, why not. Connectors cost should have been my first warning but trying to make a correct connection, fuggettaboutit. I don't know how you build cat-6 (would love to hear any tricks) but nope, gonna stick with cat-5 until I learn. way too hard...

 

[ishiboo]

We get cable DSL at the city house, of course fast as all heck, the farm gets line of site at 10 down and 2 up. Not very good but better than nothing.

Was given a box of Cat-6. I know how to build cat 5 and do most of my own wiring so figured Cat-6, why not. Connectors cost should have been my first warning but trying to make a correct connection, fuggettaboutit. I don't know how you build cat-6 (would love to hear any tricks) but nope, gonna stick with cat-5 until I learn. way too hard...

Cat6 connectors are basically the same price as Cat5 and are installed exactly the same. The only difference is you need to cut the plastic divider. If you are having issues, get the EZ-RJ45 crimper and connectors... it will greatly simplify installation.

 

[aczlan]

Cat6 connectors are basically the same price as Cat5 and are installed exactly the same. The only difference is you need to cut the plastic divider. If you are having issues, get the EZ-RJ45 crimper and connectors... it will greatly simplify installation.

Not sure if its the same thing, but at work we use passthrough connectors with a passthrough crimper (the wires go through the connector and stick out the end until you crimp the connector on, then the crimper also cuts off the wire that is sticking out).

Aaron Z

 

[woodlandfarms]

Not sure of the manufacturer of my crimper but I paid a healthy sum for it. Nope, my issue is the Cat 6 RJ-45 connectors. At least the version I had you had the CAT -6 wires are so thick that they have to be stacked, thus needing a divider that slides inside the RJ-45 connector. Could never get it all to come together. Maybe it was my hope to keep the exposed wires short that made it even more difficult. Will try again but in the end I am using wireless AC spec so I am not loosing any speed at the moment.