Egon
Epic Contributor
quite a discussion in another thread on the use of Al in vehicles.
This video shows a modern car constructed from aluminum and ash wood plus leather for the seats. Some may find it interesting?
Using aluminum on vehicles
- Thread starter Egon
- Start date
- Views: 2338
quite a discussion in another thread on the use of Al in vehicles.
This video shows a modern car constructed from aluminum and ash wood plus leather for the seats. Some may find it interesting?
RobertBrown
Elite Member
Video is blocked in the USA. No one here can view it.
Jim Shooz
Veteran Member
Garandman
Elite Member
- Joined
- Aug 3, 2014
- Messages
- 3,141
- Location
- Mount Sunapee NH / Dorchester, MA
- Tractor
- Kubota L3200 HST
Still blocked. Not really new....
OP
Egon
Epic Contributor
The video is on building an aluminum - wood morgan car. Factory is in England and has been in operation since 1909 ??
It shows laminating, gluing, riveting, forming and all that stuff that goes into hand building a car.
It shows laminating, gluing, riveting, forming and all that stuff that goes into hand building a car.
Last edited:
Garandman
Elite Member
- Joined
- Aug 3, 2014
- Messages
- 3,141
- Location
- Mount Sunapee NH / Dorchester, MA
- Tractor
- Kubota L3200 HST
The Lotus bodies were hammered out over wooden bucks. They are very impressive in person. While many are painted some are left naked for max. weight savings.
jaotguy
Veteran Member
a lot of the famous cars from Italy were also hand formed Al .... no 2 cars were exactly the same ...