UTV's and ATV's general discussion.

   / UTV's and ATV's general discussion. #161  
Got a call from an elderly neighbor couple this afternoon. They have a small orchard (apple) and this year the trees are absolutely overloaded with fruit. They'd been propping up the branches to support the weight of the apples but one of them - a big branch - broke anyway and they asked me to remove the broken limb. I went to a pellet stove 4 years ago so my chainsaws have been idle since but I fired one up and went over with the Can-am and did the job. Got a bed-load of firewood out of the deal in case I ever decide to put a wood stove in the garage!
P1003283rtbn8-21-23.jpg
 
   / UTV's and ATV's general discussion.
  • Thread Starter
#162  
Got a call from an elderly neighbor couple this afternoon. They have a small orchard (apple) and this year the trees are absolutely overloaded with fruit. They'd been propping up the branches to support the weight of the apples but one of them - a big branch - broke anyway and they asked me to remove the broken limb. I went to a pellet stove 4 years ago so my chainsaws have been idle since but I fired one up and went over with the Can-am and did the job. Got a bed-load of firewood out of the deal in case I ever decide to put a wood stove in the garage!
View attachment 817287
Thanks for posting this desert eagle. Our machine is parked in a shed and gathering dust. :eek: If anyone has there machine out and working, please post pics of that.
 
   / UTV's and ATV's general discussion. #166  
A neighbor was giving away some chunky fill and I swooped over to grab it with the Ranger. Filled the bed full and I probably could have gone a bit deeper. Notice the new chainsaw holder I just made. Probably going to paint the wood black.
 

Attachments

  • KIMG0373.JPG
    KIMG0373.JPG
    3.3 MB · Views: 339
   / UTV's and ATV's general discussion. #168  
   / UTV's and ATV's general discussion. #170  
How did you attach that to the bed?
I forgot to respond to this, sorry. I used those inserts that go into the holes on the bed. So the aluminum angle has holes drilled in it that allows the bolts from those bed inserts to go through. Seems quite secure. I will be putting the saw in the sheat so that the majority of the weight is pushing down anyways.
 

Tractor & Equipment Auctions

FLARE STACK (A47001)
FLARE STACK (A47001)
2015 Chevrolet Silverado 1500 4x4 Crew Cab Pickup Truck (A46684)
2015 Chevrolet...
2022 Deere 331G (A47307)
2022 Deere 331G...
Heavy-Duty 4-Wheel Rolling Warehouse Cart  74in x 32in (A44789)
Heavy-Duty 4-Wheel...
12in Backhoe Bucket (A48561)
12in Backhoe...
2015 East Texas Longhorn Trailers 10ft S/A Utility Trailer (A45336)
2015 East Texas...
 
Top