W&R Long 3rd Function Valve Sticking

   / W&R Long 3rd Function Valve Sticking #11  
What is the flow rating of the WR Long valve or make and model number? Reason for asking is the “Tandem center” spool (P to T, A & B blocked) on D03 valves is one of the lower flow rated spools. I looked at Rexroth 4WE6 G- spool and 12 GPM was failure point. Eaton - Vickers DG4V 3 8C spool was also 12 GPM failure point. The standard performance DG4V 3S failure point was 6 GPM @ 1200 PSI and dropped to 2.5 GPM @ 2500 PSI.
 
Last edited:
   / W&R Long 3rd Function Valve Sticking #12  
What is the flow rating of the WR Long valve or make and model number? There are potentially higher flow valve that will eliminate your problems but may also require a different mount and plumbing arrangement. Rexroth - Oil Control makes diverters with flow range up to around 30 GPM or higher.
I’m not to sure but I’ll check into that this evening
 
   / W&R Long 3rd Function Valve Sticking
  • Thread Starter
#13  
Thanks for the info. I got my tractor used at 200 hours and it was doing this, so I don’t know how new it was when it started messing up. Does any of your tractors have a backhoe attachment?
Yes, my MX5800 has a BH92 hoe. It's not related to the 3rd function valve problem though since it also occurs on the L6060 without a hoe.
 
   / W&R Long 3rd Function Valve Sticking
  • Thread Starter
#14  
What is the flow rating of the WR Long valve or make and model number? There are potentially higher flow valve that will eliminate your problems but may also require a different mount and plumbing arrangement. Rexroth - Oil Control makes diverters with flow range up to around 30 GPM or higher.
Both my tractors have the 12 GPM W&R Long valves. The sticking problem happens on both valves.
 
   / W&R Long 3rd Function Valve Sticking #15  
Both my tractors have the 12 GPM W&R Long valves. The sticking problem happens on both valves.
I still think that you should contact WR Long directly. If anyone knows about your issue, they should.

WR Long 252-823-4570
 
   / W&R Long 3rd Function Valve Sticking #16  
Yes, my MX5800 has a BH92 hoe. It's not related to the 3rd function valve problem though since it also occurs on the L6060 without a hoe.
Ok. U took the words out of mouth. lol. I forgot to check the flow of the valve I have on my tractor as the other fellow stated. Should get to it tommorow. Thanks again
 

Tractor & Equipment Auctions

CougarLift XLT-SP10 10ft Manlift (A49346)
CougarLift...
2017 Yamaha VX1050B Deluxe Jetski (A46684)
2017 Yamaha...
1998 Kenworth T800 Wet Kit Tri Axle Day Cab Truck Tractor (A46683)
1998 Kenworth T800...
John Deere Corn Head (A49251)
John Deere Corn...
2014 FREIGHTLINER 108SD WITH ELLIOT H110 CRANE/MANLIFT (A48992)
2014 FREIGHTLINER...
2015 Nissan Altima Sedan (A46684)
2015 Nissan Altima...
 
Top