Wallenstein BXM42

[SPMMD]

I have as well been considering the wallenstein BX 42 for use with my B3200. Any of you out there with experience with mounting it to a B3200?

 

[jeff9366]

I have as well been considering the wallenstein BX 42 for use with my B3200. Any of you out there with experience with mounting it to a B3200?

See Post #5. B3300SU and B3200 are practically identical.

 

[CHDinCT]

Don't have a B3200 or a B at all, but I will mention that the lower links on my BX don't go low enough to mount the BX42. Fortunately for me, I had my dealer drill two extra holes in the lower lift arms closer in to the tractor, so I just move my vertical lift rods to the extra holes, which lets the arms drop another 3" or so. The mounting points on the BX42 seem exceptionally low, even for a BX. I know some TBN members have added blocks to the bottom of the BX42 to raise it up some. Should also help with reducing the PTO angle.

 

[murphy1244]

Don't have a B3200 or a B at all, but I will mention that the lower links on my BX don't go low enough to mount the BX42. Fortunately for me, I had my dealer drill two extra holes in the lower lift arms closer in to the tractor, so I just move my vertical lift rods to the extra holes, which lets the arms drop another 3" or so. The mounting points on the BX42 seem exceptionally low, even for a BX. I know some TBN members have added blocks to the bottom of the BX42 to raise it up some. Should also help with reducing the PTO angle.

Bxm42 has two sets of lift points.