Want to cut in a coolant heater, need hose I.D.

[gemutlich]

I'm really not as lazy as it sounds, lol... Tractor ('58 641 Ford) is close to Home but not close enough to run over and measure the lower radiator hose to figure out which in-line 120v heater I need to buy.

Does anyone know off the top of your head, or have a radiator off that you can measure, tell me which size I need to get?

Along those lines, any more luck with one brand than another?

Thanks fellas.

Mel

 

[DJ54]

Here's a handy little piece of info, to help you out... According the Messicks NH online parts book, it shows the lower hose to be 1.5" ID. Here's the link to the page, but not sure it will carry through, but may only show the main page of the 641.

And, it will be handy if you need to look for any parts you need for it. New Holland (641) - 4 CYL AG TRACTOR ALL PURPOSE (1/58-12/64) Parts Diagrams

Well, it didn't, so select cooling system, and double check on hose size to be sure...

 

[gemutlich]

Thanks 'DJ, heading over tomorrow to have a look. 1.5" sounds about right, will see if I can sneak a set of calipers around that nipple past the end of the hose and confirm.