Oil & Fuel Was reading a thread about greasing the zerk fittings so I pulled out the grease gun

   / Was reading a thread about greasing the zerk fittings so I pulled out the grease gun #11  
And I assume you use "thin wall sockets"?

I was suggesting that sometimes 12pt sockets seem to have a thinner wall than 6pt sockets... Do your fittings really have a 10mm hex on them? That would be quite a bit larger than the norm...
 
   / Was reading a thread about greasing the zerk fittings so I pulled out the grease gun #12  
Do you have a "cleaner"? They work well.

imgres.jpg
 
   / Was reading a thread about greasing the zerk fittings so I pulled out the grease gun #13  
And I assume you use "thin wall sockets"?

LOL, I have a couple of sockets that met my grinder an got converted to "thin wall" status. (they were not my Snap On category ones but rather the Harbor Frt category)
 
   / Was reading a thread about greasing the zerk fittings so I pulled out the grease gun #14  
You do see shoulders on the fittings? Not the round press in ones are they?
 

Tractor & Equipment Auctions

HONDA EU2200EI INVERTER GENERATOR (A50854)
HONDA EU2200EI...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
4 BRIDGESTONE 11R24.5 (A50854)
4 BRIDGESTONE...
2012 Ram 1500 4x4 Crew Cab Pickup Truck (A49461)
2012 Ram 1500 4x4...
2011 L3 MEP-806B GENERATOR (A51222)
2011 L3 MEP-806B...
Heavy-Duty Gooseneck Hay Trailer - Built for Large Bale Hauling (A51039)
Heavy-Duty...
 
Top