Water pressure
- Thread starter chinawall
- Start date
- Views: 1271
johnray13
Bronze Member
If you have a pressure tank you can increase the cut-in pressure. Normally they are set at 40/60 psi. Or you could add a booster pump like on of these:
booster pump from Northern Tool + Equipment
John
booster pump from Northern Tool + Equipment
John
Kays Supply
Veteran Member
Is this a deepwell or shallow well? Do you have jet pump or a submersible? What size is your expansion tank? Do you have low pressure with one faucet running or with more than one? How many GPM does your well produce? These answers will help with a fix.
chh
Veteran Member
If it used to have enough pressure and now it doesn't, it could be a pump going bad. If it is a new setup it could be undersized. You have a lot of variables there. Give us a little more info.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
What's the gauge say when the pump cuts out?.. if it only comes up to 30-40 psi.. pressure switch may be misadjusted.. though i usuallly like to spend the extra 4$ and repalce the gauge as well when i replace a pressure switch just to be safe and not blow my plumbing apart due to a bad gauge..
soundguy
does the pump cut on immediatly when you turn a hose on? if so tank is waterlogged.
soundguy
does the pump cut on immediatly when you turn a hose on? if so tank is waterlogged.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
chinawall said:
If you have good pressure at the well, but not good pressure and flow at the house, then you probably have too small a pipe from the well to the house. Depending on the distance from the house to the well, you may need a 1" or 3/4" pipe. 1/2" PVC or copper won't carry enough flow.
Jimmyp5
Silver Member
jinman said:
Agree., I have 1" treated running to the house, and barn sinks etc... have put it in a 2" main along side the fence line that will be used for a drip system later on. Most places I have seen really do have a too small supply line, somehow the plumbers are not counting all the outflow points or folks are adding a lot more than the orginal design.
