WEAK KUBOTA HYDRALIC'S

[MadReferee]

Kubota Manuals

 

[Timber]

Hey Mad I personally want to thank you for posting that link. I can't tell you how valuable that will be for me. Thanks again. I have the deepest respect for the things you can do and your willingness to help all who ask

 

[MadReferee]

My pleasure, you're welcome.

I make a habit of hanging on to links that others have posted that might come in handy some day.

 

[Egon]

Very many thanks for the website.

It will be helpfull.

 

[COMPRESSOR]

THANKS MAD REFEREE FOR THE SIGHT. QUICK, FREE, FULL OF STUFF. THANKS AGAIN , COMPRESSOR

 

[norsker]

THANKS FOR ALL YOUR DIFFERENT INPUTS. I HAVE PUT A PRESSURE GAUGE ON THE BACKHOE. AROUND 1700 LBS IS WHAT I GET. I STILL DON'T KNOW WHERE THE PUMP IS LOCATED ON THE 7800 HYDRO. AND WOULD YOU BE ABLE TO SHIM IT.

It appears to me that your backhoe is plumbed through your loader valve and it`s PRV which is not only unnecessary but also detrimental to the backhoe`s performance.

1700 psi is way too low for the hoe to dig to it`s potential but is adequate for the loader as a safety to prevent you from lifting anything that will flip the tractor, especially when under way. Given that your BH has stabilizers to prevent such an occurence, this is unnecessary.

Take your rig back to the dealer who installed it and tell him to plumb it in the right way and to do it on his dime. You already paid for this thing to be plumbed correctly. If he balks, remind him of the power of the internet in spreading the word about poor service.

As someone else already stated, learn to turn your Caps Lock off when inappropriate. Why should anyone continue to read your posts to help you if you can`t extend this small common courtesy?