southernAL
Gold Member
Spent pretty much all weekend on the tractor. Had lots of fun, i'm thoroughly enjoying it!
Weekend on the Ck2510
- Thread starter southernAL
- Start date
- Views: 5443
OP
southernAL
Gold Member
OP
southernAL
Gold Member
OP
southernAL
Gold Member
OP
southernAL
Gold Member
Not sure why that last pic is upside down. But I got some good use out of my new Ken's bolt on hooks. Good product!
Buggs67
Veteran Member
Looking good. Is that a 5' brush hog? Have you tried it out yet? Or using it as ballast
.
.
PSEbowhunter
Silver Member
Looks good. It's easy to keep looking for things to do while tractoring. I've been very impressed with my 2510. I had kens hooks on mine for the first year and loved them. But I had to take them off.
Buggs67
Veteran Member
NIce grapple. I also like the expanded steel added to the front guard. A mod I'm planning to do.
PSEbowhunter
Silver Member
That's actually the platform from one of my old treestands. It fit perfectly inside the stock brush guard. The grapple is from Michigan iron and equipment and I like it a lot. I put about 5hrs into it today moving fire wood.
OP
southernAL
Gold Member
The rotary cutter is a 4' and I used it once so far. PSE, you have any other pics of that grapple? Is it bucket mounted? What do you use to control it? Looks good!
PSEbowhunter
Silver Member
Yes it's bucket mounted, there are 3 bolts through the bucket on each side holding the main bar on. The grapple can be removed from the mounted bar with 3 bolts/pins and the hydraulic connectors. I control it with a diverter kit so when I press the trigger on the new joy stick it changes the curl function to grapple function. I also built a tooth bar for the bucket.
Everhard
Gold Member
Nice work! Any more info on the tooth bar? Those are some serious looking teeth on it.
Thanks,
E.
Thanks,
E.
PSEbowhunter
Silver Member
I don't have any pictures of the toothbar handy. But I used teeth from here
Bucket Tooth Assembly A-175-1 | Build Your Own Tooth Bar | Quality Welding Service
and welded them to some spare 1/2" by 3" plate.
I didn't do any build pictures because there are so many toothbar build threads here already.
The bar helps with digging with the fel and also helps keep logs and such in the bucket.
Bucket Tooth Assembly A-175-1 | Build Your Own Tooth Bar | Quality Welding Service
and welded them to some spare 1/2" by 3" plate.
I didn't do any build pictures because there are so many toothbar build threads here already.
The bar helps with digging with the fel and also helps keep logs and such in the bucket.
OP
southernAL
Gold Member
Sweet action! I like it!
lakngulf
Veteran Member
I agree. That is a good looking piece of equipment.
