weep hole drip
- Thread starter chas123
- Start date
- Views: 1979
bruce1966us
Platinum Member
You should before the bearing goes out and the fan ends up in the radiator!
bruce1966us
Platinum Member
You should before the bearing goes out and the fan ends up in the radiator!
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Can't say it any better than that. At best.. I'v turned a vehicle off to stop the drip, rubbed a dab of silicon int he weep hole, and then drove on to get it to a place that I could fix it.. but otherwise.. yes.. a drippy pee hole means a bad seal.. a bad seal usually means a loose bearing.. or, int he case of just the seal failing, thent he water can get in and corode the bearing, and then it will fail.. just a matter of time..
Soundguy
Soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Can't say it any better than that. At best.. I'v turned a vehicle off to stop the drip, rubbed a dab of silicon int he weep hole, and then drove on to get it to a place that I could fix it.. but otherwise.. yes.. a drippy pee hole means a bad seal.. a bad seal usually means a loose bearing.. or, int he case of just the seal failing, thent he water can get in and corode the bearing, and then it will fail.. just a matter of time..
Soundguy
Soundguy
