zook
Member
Where is the cheapest place to buy Kubota front weights?
Weights
- Thread starter zook
- Start date
- Views: 1809
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
in general oem weights are never 'cheap' 
many of us make our own weights.. either out of plate steel,, or cast concrete.. or repurposed other weights. like barbell blates and a rod made to a bracket.. etc.. fitting a bumper or etc...
post back..
many of us make our own weights.. either out of plate steel,, or cast concrete.. or repurposed other weights. like barbell blates and a rod made to a bracket.. etc.. fitting a bumper or etc...
post back..
ArtMech
Platinum Member
- Joined
- Oct 5, 2010
- Messages
- 952
- Location
- Lithuania, EU
- Tractor
- Present: 2003 Kubota M9000 DTF; 2001 Kubota B72. Sold: 1985 Kubota L2202
sbakf
Bronze Member
- Joined
- Dec 23, 2009
- Messages
- 87
- Location
- Columbiana, AL
- Tractor
- 2010 L5740/cab & BX2660/FEL with 60" MMM
When in need of rear ballast, I attach my RCR1872 to back of my 5740.
Notforhire
Veteran Member
I bought aftermarket rear wheel weights from my Kubota dealer. They cost about $1.00 per pound. Everything Attachments sell the same ones, but they only sell by the 1/2 ton. I added about 350 lbs. The tractor feels much better on slopes.
