Weird hydraulic outlet/3pt question

[putt_putt_green]

If they still sell this tractor, I'd go check a similar tractor at a dealer. A Cat, MF, or Agco dealer would work.

I also agree that it looks like there is a hidden divertor valve.

Can you contact the seller?

 

[Builder]

The tractor is made by Iseki in Japan.

I have 2 sets of true remote couplers on the back of the tractor.

 

[Hooked_on_HP]

Is there any chance of contacting the previous owner.

 

[Builder]

Is there any chance of contacting the previous owner.

I already did. He used it 90% as a backhoe and only removed the BH to do some mowing. He really doesn't know.

 

[MarkV]

Builder, I was looking at the photo’s of your tractor that you posted in another thread and I am a bit confused. I see the position control lever and that is what I would expect to raise and lower the 3pt arms to whatever level I set it. At least it does on both of my Kubota’s. My guess is the slot without a lever was for a draft control option that this tractor does not have. Why one of the remote levers raises the 3pt. is rather baffling.

You are saying that the lever marked position control does not raise or lower the 3pt arms, right? If that is the case someone did some funny plumbing on the hydraulic system.

Nice tractor, good luck.

MarkV

 

[Spudland_Dave]

If they still sell this tractor, I'd go check a similar tractor at a dealer. A Cat, MF, or Agco dealer would work.

Agreed....Find the Massey "Equivalent" of yours and try a Massey Dealer for help, from what I've heard the Cat boys rather work on big equipment then little consumer stuff...