Weld on bucket hooks!

[lutt]

In finally got around to welding on my bucket hooks. It's been a while since I've mig welded, so excuse the welds. Also the hooks have been in my basement, that's the reason for the rust. LUTT

 

[deerseeker001]

Good Job

 

[lutt]

Thankyou sir! LUTT

 

[Pepsiboy]

In finally got around to welding on my bucket hooks. It's been a while since I've mig welded, so excuse the welds. Also the hooks have been in my basement, that's the reason for the rust. LUTT

lutt,
Looks like a pretty good job to me ! ! :2cents: I used the same type hooks on my BX2350 loader, and there has never been a failure to date. I'm sure you will get LOTS of use from them.

Dave

 

[murphy1244]

Good Job Lutt! I use my hooks almost as much as the Bucket.

 

[lutt]

Thanks guys, I appreciate that! I'm sure I will. I know I've wished I had them own there more than a few times already! LUTT

 

[Nightforce]

I think those welds look pretty good and suspect they'll stay put for a good long time. :thumbsup:

Grab a wire brush then a bit of sanding and paint if you want them to look factory installed!! :thumbsup:

 

[lutt]

I think those welds look pretty good and suspect they'll stay put for a good long time. :thumbsup: Grab a wire brush then a bit of sanding and paint if you want them to look factory installed!! :thumbsup:

that is on the radar I've for some other work to do to the bucket, but I am gonna paint them. Thanks LUTT

 

[lutt]

Got to use them this evening, worked well! Had to drag some logs in the clear to buck. LUTT

 

[Nightforce]

Lutt, be careful with using only one hook. Applying weight to only one side of the bucket especially on uneven ground could tip the tractor on its side...Just a heads-up is all....