bake321
Silver Member
I bought a 3pt post driver to use on my M9450. I have two sets of remotes. The top set detents in the forward position and is spring return to the rear. The bottom set of remotes detents both ways. I was told to hook up the supply line to a remote that detents and this would give me a hydraulic source to the post driver. The problem is that as soon as I operate any lever on the post driver the remote jumps out of detent. My nieghbor who has many Fords says that they use a bungee cord to hold them in detent. that dosen't sound very wise to me. Any help would be appreciated.
Bake
Bake
