what size 3pt blade?
- Thread starter gunnar52
- Start date
- Views: 1289
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,655
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
The 8 footer would be a good size for your tractor.
milkman636
Veteran Member
- Joined
- Aug 15, 2010
- Messages
- 1,482
- Location
- Palm of the Right Hand
- Tractor
- Bobcat CT335 + John Deere 1023e (former owner of Kubota BX2370-1, John Deere 5210, and Ford 2000)
The 7' would get narrower than your tractor if your working with over 30 degrees of pivot.
I use a Bush Hog 5007 for snow removal with my ct335, which is only about 65" wide. On a 30 degree angle the 7 footer puts the snow just past where my tires tracked. It works well for clearing some of the tight places that I do.
For anything other than snow, I really prefer using my 8' Woods HBL96 behind my 5210. The 5210 runs 73 inches wide, and the 7' blade will never even get close enough to that hitch to even think about hooking up.
I use a Bush Hog 5007 for snow removal with my ct335, which is only about 65" wide. On a 30 degree angle the 7 footer puts the snow just past where my tires tracked. It works well for clearing some of the tight places that I do.
For anything other than snow, I really prefer using my 8' Woods HBL96 behind my 5210. The 5210 runs 73 inches wide, and the 7' blade will never even get close enough to that hitch to even think about hooking up.