What size bolt on L4400...Help please

[cityfarma]

Hi city:
On my L4400 I just tried sockets on all the hydraulic bolts I could find. Some were 23 mm and others were 26 mm. Most were 26mm.
simonmeridew

Thanks for this.

I actually do have a fairly comprehensive set of sockets and spanners both metric and imperial. My problem is that they were all too small. I tried a 12" adjustable but it would not get onto the bolt properly.

Thanks Alchemysa I will check it out and can then leave the set on the farm rather than drag my good ones back and forth.

Cityfarma

 

[RobJ]

Yeah they look bigger sized, 22, 24, 26 range.

Owning a tractor requires a 15" cresent. Nothing wrong with a cresent on a larger nut.

Rob

 

[simonmeridew]

Hi again City:
OK I went back out to the barn now that it's light out and put a 26mm socket on the bolt that you talked about, attaches the U shaped hydraulic pipe to the block. Perfect fit. So that's the the size: 26 mm.

simonmeridew

 

[cityfarma]

Hi again City:
OK I went back out to the barn now that it's light out and put a 26mm socket on the bolt that you talked about, attaches the U shaped hydraulic pipe to the block. Perfect fit. So that's the the size: 26 mm.

simonmeridew

Thanks Simon. A 26mm spanner is now on my shoppng list. Also thanks to others for taking time to respond.

Cityfarma