OP
deepNdirt
Veteran Member
Basically there is no other place
these compact tractors have limited places for any kind of add -on's, I think I'm pretty much stuck with it at this location, if it turns out I must use thes ports I will of course have to adapt with some L-fittings to send the hoses away from this point of contact, I've also considered maybe could cut the end of the pin off by 1/2 inch and re-drill the keeper hole,..... or option C- X out this rear tilt idea all together
these compact tractors have limited places for any kind of add -on's, I think I'm pretty much stuck with it at this location, if it turns out I must use thes ports I will of course have to adapt with some L-fittings to send the hoses away from this point of contact, I've also considered maybe could cut the end of the pin off by 1/2 inch and re-drill the keeper hole,..... or option C- X out this rear tilt idea all together
Last edited: