What's that noise???
- Thread starter CompactTractorFan
- Start date
- Views: 2019
Bwgad96
Silver Member
haha o so thats where that went.....
First one
Gold Member
You must have been thinking "What the h...is that "! I know I'd be thinking It's going to cost big bucks to fix that . After finding that , I'd had to have a cold one to celebrate:thumbsup:
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 30,987
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Had to be BIG relief..whew.
Maybe good sign backhoe not to far off.
Maybe good sign backhoe not to far off.
OP
CompactTractorFan
Super Member
Garden shovel...It's not that old...
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
reminds me one time when I was on my 15yr old ( now ) murray mower.. was 13ys then.. and was making a cut down the edge of the road right of way.. and she started banging hard.. I thought.. Oh great... POS 700$ mower is gonna give out after only 13ys and is throwing a rod or that cast iron sleeve they are so proud of is banging..
idled it down a nd drove back to barn.. looked at engine and sw it MOVING on t he frame.
upon close inspection.. the engine is held to t he unistrut frame with large lag bolts.. yeah.. like wood screws.. not fine or coarse thread bolts with nuts... just a pointy headed screw which goes thru a washer thru the mount ear and into the folded frame metal
what a cruddy design.. but then.. what do you expect for an economy mower..
removed and cleaned them, reinstalled with some red loctite.. 2more years and no more banging.
and is throwing a rod or that cast iron sleeve they are so proud of is banging..idled it down a nd drove back to barn.. looked at engine and sw it MOVING on t he frame.
upon close inspection.. the engine is held to t he unistrut frame with large lag bolts.. yeah.. like wood screws.. not fine or coarse thread bolts with nuts... just a pointy headed screw which goes thru a washer thru the mount ear and into the folded frame metal
what a cruddy design.. but then.. what do you expect for an economy mower..
removed and cleaned them, reinstalled with some red loctite.. 2more years and no more banging.
Qapla
Veteran Member
Some years back we rented a 310 Backhoe. It worked great for what we were doing but like most rental units they were holding us to the 8 hours of use per day for a weekend rental - keep in mind that here in Florida the days are much longer then 8 hrs.
While using the machine it stopped moving forward/reverse. We checked the fluid level and it appeared it was low - quite a bit low - it needed nearly a full bucket to bring it up. We got some fluid and topped it off - didn't help.
We called the rental place and told them about the problem and they said it would be Monday before they could send someone out.
We kept looking at the machine and found a wire underneath that looked like it was hanging ... when we followed it, it was unplugged. When I plugged it in, the 310 worked just fine.
We called the rental place and they were so happy we fixed the problem and topped off the low fluid they lifted the 8 hr time limit and let us have an extra day with the 310.
While using the machine it stopped moving forward/reverse. We checked the fluid level and it appeared it was low - quite a bit low - it needed nearly a full bucket to bring it up. We got some fluid and topped it off - didn't help.
We called the rental place and told them about the problem and they said it would be Monday before they could send someone out.
We kept looking at the machine and found a wire underneath that looked like it was hanging ... when we followed it, it was unplugged. When I plugged it in, the 310 worked just fine.
We called the rental place and they were so happy we fixed the problem and topped off the low fluid they lifted the 8 hr time limit and let us have an extra day with the 310.
