rockyridgefarm
Elite Member
not actually - it is cast iron. you might be thinking about the connecting rods.
Whats the differences between 3R and 3E?
- Thread starter Musdalen
- Start date
- Views: 36752
not actually - it is cast iron. you might be thinking about the connecting rods.
mike69440
Elite Member
- Joined
- Jun 2, 2005
- Messages
- 3,362
- Location
- Central NH (God's Country)
- Tractor
- 2005 L39 Kubota, 2020 Polaris 570 Sportsman, 2006 RTV 900, 2019 RTV1100C, 1997 Komatsu PC75UU2E w/ Thumb & Blade, 2013 Mahindra Max28XL Shuttle plus many attachments
Al con rod in a diesel would be done in a day or less.
airbiscuit
Super Member
- Joined
- Aug 28, 2004
- Messages
- 7,453
- Location
- NW Wisconsin
- Tractor
- New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
It is the Rear differential/Axel Housing that is aluminum. It is functional, but lighter, and potentially more susceptible to failure (3 point attachment points breaking for example).
rockyridgefarm
Elite Member
I managed to break aluminum axle housings on a Deere (had a major backhoe problem)
Fortunately, I was able to change them along side a buddy who had the same problem - his were broken too,
The good thing for me was the replacement Deere parts were a lot less than his Kubota ones.
And, yes, I would have been the first one to say that those cast iron ones would gold up better.
Fortunately, I was able to change them along side a buddy who had the same problem - his were broken too,
The good thing for me was the replacement Deere parts were a lot less than his Kubota ones.
And, yes, I would have been the first one to say that those cast iron ones would gold up better.
rockyridgefarm
Elite Member
But, as to reliability on a Yanmar engine. There is no need to defend them. They are legendary.
Not that Kubota's aren't.
Not that Kubota's aren't.
airbiscuit
Super Member
- Joined
- Aug 28, 2004
- Messages
- 7,453
- Location
- NW Wisconsin
- Tractor
- New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
True that. I hope Yanmar does well with its stand alone USA product launch. They make good stuff (and have an innovative new transmission). They will need to expand their dealer network and price aggresively early on to show they mean business. That said, they know how to build CUTs, and have a strong pedigree.
