whats this for? bottom right engine lever

[BC Dave]

Got it!; THANKS!

:thumbsup:

SO thats how it works!

might ba able to "McGiver" something like that; bicycle shop here I come ...;

...or maybe a piece of string would do; ...LOL ...

Cheers BC Dave

 

[JCByrd24]

This site is awesome. I was just working on my 186d because the throttle was sticking open, return spring up at lever wouldn't return throttle. Fixed it with a little blaster where the throttle lever enters the injector pump, but found this "other" lever, which appeared to be missing a cable, oh no! Better check TBN, and sure enough there it is, completely normal and fine for the 186d, with pics to boot.

 

[California]

I cleaned my linkage and it still wouldn't shut down reliably so I added a spring that pulls upward after the lever goes past center. That solved the problem.

A spring pulling forward would be better but I didn't see anything straight forward to attach it to; it would scrape on the side of the radiator and probably snag in brush.

Photo looking straight down.