Steppenwolfe
Super Member
- Joined
- Apr 11, 2012
- Messages
- 6,374
- Location
- The Blue Ridge Mountains
- Tractor
- Kubota MX5400, 1140 RTV
Check out Woodmaxx first. Very high performance and relatively low cost.
Chipper What's your opinion on this chipper ?
- Thread starter bill ns
- Start date
- Views: 4915
OP
bill ns
Bronze Member
- Joined
- Jan 8, 2009
- Messages
- 60
- Location
- parrsboro nova scotia canada
- Tractor
- 1970 ,276 International Harvester2008 dk 35 kioti, 1957 cockshutt540
Well i have had the wood land industry's chipper for a couple of months now I was cheep and bought the mechanical feed unit It works great i have cleared about a acre of alders and black cherry no issues yet
When i got the chipper i had to tighten every thing it took about 6 hours to check every thing grease it fill it with oil but now i know the machine inside and out
The woodland industrys guys were great to deal with I had a couple of questions They replied very quickly the man i spoke with even had his own chipper and used it regularly
It is a Chinese made chipper but seems to be well made and simple straight forward design easy to fix when i need to
Very happy with it so far
When i got the chipper i had to tighten every thing it took about 6 hours to check every thing grease it fill it with oil but now i know the machine inside and out
The woodland industrys guys were great to deal with I had a couple of questions They replied very quickly the man i spoke with even had his own chipper and used it regularly
It is a Chinese made chipper but seems to be well made and simple straight forward design easy to fix when i need to
Very happy with it so far
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,178
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
rasorbackq
Platinum Member
I bought one last week. 3 days 3 clogged flywheel chamber and smoking belts. They say the bed plate is not adjusted right. It doesn't adjust how they want it to. Closest I can get it is 1/4" and calls for 1/16 clearance.
Expecting a call back this afternoon ref it.
Expecting a call back this afternoon ref it.
Sparky67
Member
- Joined
- Apr 11, 2015
- Messages
- 35
- Location
- Caledon, Ontario
- Tractor
- Kubota L6060 HST 4x4, B7100 HST 4x4 and ASV PT-50 Skid Steer, Kubota SVL-75-2, Vermeer 1500XL, JLG460 SJ, RTV's
I own an 8" Hydraulic Woodland Mills Chipper and am very happy with it. Solid unit and it is a real workhorse. Only had it 3 months but have chipped many trees and branches and does a great job. Great unit to have around your property without breaking the bank. No regrets.
Sparky67
Member
- Joined
- Apr 11, 2015
- Messages
- 35
- Location
- Caledon, Ontario
- Tractor
- Kubota L6060 HST 4x4, B7100 HST 4x4 and ASV PT-50 Skid Steer, Kubota SVL-75-2, Vermeer 1500XL, JLG460 SJ, RTV's
rasorbackq,
what RPM are you running it at? I found that under 515 would clog. I run mine between 530-540 and it does not clog. Had a couple clogs but with the slight;y higher RPM works great.
what RPM are you running it at? I found that under 515 would clog. I run mine between 530-540 and it does not clog. Had a couple clogs but with the slight;y higher RPM works great.
jrclark
Silver Member
Whoa there Sparky. Your responding to threads that are 2-3 years old. Careful when using that search function 
