wheel pattern

[bcinlittleaxe]

Can anyone tell me what wheel pattern is on a gooseneck trailer with 7k axles, for example I know that most 3.5k axles take a big bolt chevy wheel and 3k take a small bolt chevy. Any help will be appricated

 

[Xfaxman]

Mine is 8 hole


The 6K is also 8 hole.

 

[bcinlittleaxe]

sorry guys, I may have mislead the question, I know it's 8 hole but what I'm wanting to know is what truck rim will fit my trailer. Ford chevy dodge ????

 

[Xfaxman]

I guess nobody in the Mahindra Forum knows. I think all 8 hole are all the same bolt circle, but I don't know for sure.

Try this Forum: http://www.tractorbynet.com/forums/newthread.php?do=newthread&f=62

 

[EMB5530]

all old 8 hole are the same but the center hub on chevy is smaller than ford don't know about dodge center hub size for sure though.

 

[triptester]

Here is a site for wheel cross referance. They show two sizes 8x6.5" and 8x 170mm. The second site covers more years.
Wheel Bolt Pattern Cross Reference Database and Conversion Guide: 8*X*6.5

http://www.crawlpedia.com/bolt_patterns.htm

 

[bcinlittleaxe]

thanks triptester that will be very useful information

 

[triptester]

When using truck or auto rims on a trailer several things must be checked to insure they will fit. Center hub hole size, offset, and stud seat taper. Trailer rims usually have a large center hole but truck and auto rim center holes vary greatly. Trailer rims have the hub face centered in the rim where auto and truck rims can vary as much as 3 inches +/- . Most studs have a 45 degree taper but a few use a 60 degree taper.