Wheel spacing question...
- Thread starter helle253
- Start date
- Views: 1337
the6shooter
Gold Member
I just got my 1643, and did notice, and after reading the manuel. they are changeable, Mine are set at 68" and can be set less under 60". This is something I will like here in the future, it keeps me from having to buy a wider tiller.
Looking at my wheel set up it appearse I can go about 8 to 10 inches wider.
I can't see going wider due to 72" rotory cutter.
hope this helps.
david
Looking at my wheel set up it appearse I can go about 8 to 10 inches wider.
I can't see going wider due to 72" rotory cutter.
hope this helps.
david
ff1221
Bronze Member
- Joined
- Jan 20, 2008
- Messages
- 90
- Location
- Kincardine Ontario Canada
- Tractor
- Massey 5455 cab & Loader John Deere 4320 cab & Loader John Deere 2520 w/loaderKubota KX41-2
The6shooter is right, on the rear you can turn the rims around, also you can set the outer rim either inside or outside the centre hub, the only thing I'm not sure of is the front rims, you can probably spin those around and widen the stance, but there isn't as much versatility as with the rear.