Where does this go?

[Clay45]

I have one of these : Heater Plug

Don't recall why I got it and don't know how/where to install it nor where it gets its power. Does it hook into ignition somehow?

Thanks in advance.

 

[Barry 1]

#1 in picture
Power comes from key switch,when turned left.

 

[careyo63]

Hoye is showing the same Thermal/Glow plug as my Ym2000. If your Ing. switch is the same then here's a wire Dia. Just a lead from the R2. Circuit. Turn the switch to the left. If you don't have a Fuel Bowl which I don't. And Rarely have I had to use the TS.. So here is my Quick setup. Works great and the only thing you may need to do is give it a little squeeze to blow the air out of the line if needed. Wait until it gets hot so the TS is open. Then I squirt what's left it back in the Tank.

 

[bmaverick]

Hoye is showing the same Thermal/Glow plug as my Ym2000. If your Ing. switch is the same then here's a wire Dia. Just a lead from the R2. Circuit. Turn the switch to the left. If you don't have a Fuel Bowl which I don't. And Rarely have I had to use the TS.. So here is my Quick setup. Works great and the only thing you may need to do is give it a little squeeze to blow the air out of the line if needed. Wait until it gets hot so the TS is open. Then I squirt what's left it back in the Tank.

In the diagram, it shows a horn switch. I would love to find one of those to hookup.

 

[careyo63]

Here's proof it's there. And mine works. Think back to the Road Runner in Cartoons and that's what it sounds like. Can't help not to smile.

 

[bmaverick]

Here's proof it's there. And mine works. Think back to the Road Runner in Cartoons and that's what it sounds like. Can't help not to smile.

I tried Hoye, Fredrisks and others, but they no longer carry the switch. My YM2610 came with a horn up front betwix the head lamps.

Hey, what's that added switch down below you had added?

 

[careyo63]

Headlights. The Black toggle is my Rear work light. Tach. behind the Steering wheel. It was setup like this when I bought it. I had the switch out just to see how it was cut in the dash. It's to clean of a cut. Perfect!. IMO. it's Org.. Trust me! I left Steve at Spalding a Chk. for this one until I could get back to pick it up.

 

[Clay45]

Thanks gents! I flat forgot about starting this thread. My 1401 has horn button and turn signal switch that don't function.

Regards,

Clay