Buying Advice Where to find front end loader for NorTrac 204C??

[crackenzag]

Hey everyone. I've recently acquired a NorTrac 204 C 4wd 20 horse tractor. It doesn't have a loader and I would like to find one. Not above buying a new one but would prefer a decent used one. I've looked high and low online and haven't really had any luck finding one. Does anyone know where to look for a loader that would fit this tractor? New or used? I'm in the Branson MO area. Thanks for any help!

 

[s219]

Who made that model NorTrac? Jinma, Foton? If you can find out who made it that might make it easier to find something that fits,

 

[quicksandfarmer]

I think that's a rebadged Jinma 204. Koyker probably makes a loader for it.

 

[crackenzag]

Yes it's a jinma

 

[crackenzag]

The only place I've found online that seems to be able to even show one is Alibaba... I don't think I have it in me to mess with that. Loaders by themselves in general for anything seem hard to find. Any one got any suggestions on where to look?

 

[quicksandfarmer]

Koyker Manufacturing - Loaders

They list a match for Jinma 204. They don't list a match for NorTrac 204C. You'll need to find out if there is a difference that is significant.

 

[Affordable]

We have a used Koyker 140 loader that should fit it, it came off a Jinma 254 ,its in good shape,has valve, brackets, you would have to pick it up too bulky to try and ship. I will take $ 1,500.00 cash for it picked up in Bellville,Texas , same loader new will cost you around $ 4,000.00 plus shipping. I can email you some pics if you want, my email is
tommydplumber@gmail.com

Tommy
Affordable Tractor Sales Co
"Your Jinma Parts Superstore"
979-865-4002
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[2458n]

Loader valve for Kubota is 1200.00 for a old 20 horse tractor. Needless to say the old one was rebuilt.

 

[crackenzag]

email sent affordable

 

[sd455dan]

Loader valve for Kubota is 1200.00 for a old 20 horse tractor. Needless to say the old one was rebuilt.

Yeah the price of FEL's has made it in some cases a better deal to buy the used 4x4 china tractor to get the FEL .

I just noticed 3 craigslist china tractors with American loaders for about the money a new US built FEL would cost.

284 Jinma with koyker FEL AND chinese Backhoe for $5000 obo

Rhino 754 with Westendorf 24 or 26 FEL- over 3000 lbs lift for $5900

Rhino 504 with Koyker K2 for $7500

Buy good used loader- comes with with free 28 hp 75 hp or 50 hp 4x4 chinese tractor.

 

[crackenzag]

Yeah the price of FEL's has made it in some cases a better deal to buy the used 4x4 china tractor to get the FEL .

I just noticed 3 craigslist china tractors with American loaders for about the money a new US built FEL would cost.

284 Jinma with koyker FEL AND chinese Backhoe for $5000 obo

Rhino 754 with Westendorf 24 or 26 FEL- over 3000 lbs lift for $5900

Rhino 504 with Koyker K2 for $7500

Buy good used loader- comes with with free 28 hp 75 hp or 50 hp 4x4 chinese tractor.

No doubt. I stumbled on this one, original owner thought it had a bad engine. Turns out all it needed was an injection pump. Engine is fine!! has over 400psi compression in all 3 cylinders, quiet as any 3 cyl diesel should be. Got a new pump, 3 new glow plugs and she purrs!!! I'm all in on this tractor with a 5' brush hog for $1300. Add a $1500 loader and Ill still be in for less than $3000. I don't think that's too bad

 

[sd455dan]

Yeah if I had the extra coin , That Jinma 284 with Koyker Loader and the sub frame mount backhoe would already be mine.


Sounds like you got a great deal on the Jinma:thumbsup:

 

[crackenzag]

Thanks affordable! She's all up and running

 

[Gale Hawkins]

crackenzag that is a nice rig you pulled together. Small to fit tight spaces but still can do a lot of work.

 

[crackenzag]

Thanks Gale! It's gonna be a workhorse. May not be as shiny or clean as she once was, but she will get the job done!

 

[Brad_Blazer]

Very nice. Awesome how Tommy hooked you up with that loader.

 

[sd455dan]

View attachment 540919

Thanks affordable! She's all up and running

Nice job installing the FEL- and a perfect fit to. Great price from Affordable also.

Looks like time to put that FEL tractor to work:drink:

 

[Affordable]

Glad things worked out and its up and running, you just picked up the Loader Monday morning , quick work

If you need any other parts ( Like the Grill insert ) , Tachometer ,ect we have all those parts in stock too

Tommy
Affordable Tractor Sales
" Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[crackenzag]

I don't mess around! Lol and as far as that grill insert, cosmetics will have to wait. I'll call your son here in a bit and quiz him on the parts I need to get the tach going