where to mount extra spools

   / where to mount extra spools #12  
Here is a picture of mine. The spool valve position is comfortable but the QDs could be higher for toplink clearance and further back for seat clearance. I will redo the mounting bracket when I get a ROPS.

 
   / where to mount extra spools #13  
Tig said:
Here is a picture of mine. The spool valve position is comfortable but the QDs could be higher for toplink clearance and further back for seat clearance. I will redo the mounting bracket when I get a ROPS.


I think you photoshoped that picture with all those connections and lines. :D :D
 
   / where to mount extra spools #14  
subzero said:
carsca - that looks like a nice system...the reason that you have quick couplers on your in / out / PB ... is because you can quick connect when you don't have back hoe on ??.. can you add some other pictures of the controller, front .. side .. mounting ... etc ... would be much accepited..

Quick connects on everything so I can hopefully standardize all hoses and minimize my inventory of spares.

As requested, here are more pictures.
 

Attachments

  • tbncarsceExtraSpools.jpg
    tbncarsceExtraSpools.jpg
    33.2 KB · Views: 245
  • tbncarsceExtraSpoolsRear.jpg
    tbncarsceExtraSpoolsRear.jpg
    51.3 KB · Views: 207
  • tbncarsceExtraSpoolsFront.jpg
    tbncarsceExtraSpoolsFront.jpg
    40.5 KB · Views: 196
  • tbncarsceExtraSpoolsSide.jpg
    tbncarsceExtraSpoolsSide.jpg
    42.4 KB · Views: 210
   / where to mount extra spools #15  
carsce said:
Quick connects on everything so I can hopefully standardize all hoses and minimize my inventory of spares.

As requested, here are more pictures.

Thanks for the pictures, pretty slick set up.

A couple of questions: Does that mounting get in your way when you use the backhoe? What in the heck is burning down in the valley?
 
   / where to mount extra spools #16  
ore540 said:
Thanks for the pictures, pretty slick set up.

A couple of questions: Does that mounting get in your way when you use the backhoe? What in the heck is burning down in the valley?

I installed it with the backhoe on to verify that the backhoe is not a problem and the seat does not hit the spools when turned in either direction.

As far as the fire goes, here is what the local paper had to say.

Smoke filled part of the skies of Lake Havasu today as firefighters from the U.S. Fish and Wildlife Service and the Bureau of Land Management conducted a single prescribed burn of about 280 acres at the Havasu National Wildlife Refuge. The burn is being done to reduce the future possibilities of wildfires and enhance critical wildlife habitat, according to Refugee officials. The burn is being conducted only during daylight hours.
 
   / where to mount extra spools #17  
Carsce

Any chance on getting some details of that setup? I am new to hydraulics and wanting to add just that to my BX24. What valve did you use? and what cylinder for the Top link and Tilt ?
 
   / where to mount extra spools #18  
This where I put mine on my B7800. Lee
 

Tractor & Equipment Auctions

2011 Ford Transit Connect XLT Cargo Van (A50323)
2011 Ford Transit...
2006 Isuzu NPR 16FT Box Truck (A50323)
2006 Isuzu NPR...
Tesco 200 Gallon Tank (A50774)
Tesco 200 Gallon...
Westendorf Gravity Wagon (A50514)
Westendorf Gravity...
2018 FABRIQUE 20FT TRAILER (A52141)
2018 FABRIQUE 20FT...
2025 72in Rock Bucket Skid Steer Attachment (A50322)
2025 72in Rock...
 
Top