Which Tooth Bar to get??

[SteelMastiff]

So looking at ordering the Piranha, I have the CX200 loader with the 61" bucket. Should I order 60.75" or put in 61" as the bucket size?

I followed the measuring instructions on their website and it was a perfect fit, so probably worth a read
should you order one, because, if I recall correctly they need to know some other details regarding the condition of your bucket.

 

[thekkfan]

I followed the measuring instructions on their website and it was a perfect fit, so probably worth a read
should you order one, because, if I recall correctly they need to know some other details regarding the condition of your bucket.

Same here, read their online instructions for a good fit.

 

[3gunr]

A buddy just got his pirrahna today for his new Ls xr4140. He is pumped. cant wait to use it.

 

[jayincmh]

A buddy just got his pirrahna today for his new Ls xr4140. He is pumped. cant wait to use it.

Based on my needs (primarily), and all of the feedback from the folks in this forum, I just ordered a piranha tooth bar today for my 72" bucket. The reviews and feedback (here) from those who own them are consistently exceptional. Seems like a nice increase in FEL capability for a few hundred dollars. I'll update this forum when mine arrives and I get it installed. Anyone here that can tell me how long the shipping process typically takes for these bars? (meaning how long before the factory / dealer ships it). Thanks in advance.

 

[jeff9366]

Piranha comes with attachment stubs intentionally just a tad narrower than bucket walls.

Attachment hardware pulls attachment stubs tight against bucket walls.

Order 60.75" width.

 

[shooterdon]

Just a warning. The holes on the attachment tabs wound up partially overlapping a raised portion on my LS 4140 bucket. Had to return it and they made longer tabs.

If your bucket has flat sides, you will not have an issue. If not, send a picture and dimensions with your order so they can work around it.

 

[Agent Blue]

I welded one using a 3/8" 5" flat stock and backhoe bucket teeth for my 55 hp NH compact. It rips out tree stumps, rocks , and works well in hard compacted soils. About $200 in parts for a 66" bucket.

 

[suburbanfarmer]

I welded one using a 3/8" 5" flat stock and backhoe bucket teeth for my 55 hp NH compact. It rips out tree stumps, rocks , and works well in hard compacted soils. About $200 in parts for a 66" bucket.

Any pics that you can share?