klem531
Member
Welp fellers, here finally is a picture of the old girl, My Field Boss 37 (Iseki TE4370), in one of many states of repair I am having one heck of a time figuring out why this PTO wont work. Maybe someone in computer land can help. Ok, this is what I have done so far: There is a gear shift lever that mechanically engages and disengages the drive gears for the PTO. This is working... The PTO spins freely when disengaged and does not when engaged- makes sense right? Next, there is a switch on the dash that controls a solenoid that provides oil flow to the PTO control valve. Switch in on position, I have 12 volts at the solenoid and I can hear the solenoid pull in.Turn switch off solenoid returns to open. Next, there is a clutch lever on the trans case that controls oil flow to the PTO control valve and the rate at which the PTO engages. The lever when moved forward, pushes in a plunger on the valve assembly and I presume alows oil to flow. The plunger appears to be going all the way in when engaged. Oh and of course I have checked the oil level. I'm not really sure what to check next. Any suggestions would be greatly appreciated. Thanks, Tony K. P.S. I have all the manuals for this tractor so If I can help someone else with a diagram, Part# etc. please let me know.