Why is my T/M cooler covered in oil and dirt? XR4150HC

   / Why is my T/M cooler covered in oil and dirt? XR4150HC
  • Thread Starter
#21  
It's available from LS or New Holland dealers. Here's a link for CNH: COOLER | #MT40323120 | MSC-INTERCOOLER PTS | Misc Engines, Cooling & Exhaust | Engines, Cooling & Exhaust | Category | New Holland AG | MyCNHi US Store. My LS dealer quoted a price of $128, so I thought I was going to save a couple of bucks. However, after shipping and taxes, it was still $160.

The thing that changed between the two part numbers is the bracket on the side, not the cooler itself. You have to disconnect the hoses from the right angle adapters first. It's one of those deals where there's no space and you have to turn the nut 3 degrees over and over and over again. I had to remove the flange on the left side of the radiator after removing the coolant reservoir to have room to pull it out. You'll need to take off the right angle adapters and move them to the new unit. They use a compressible o-ring to seal on the cooler.

BTW, my dealer checked with LS who denied warranty coverage.
 

Attachments

  • IMG_20210613_123557214.jpg
    IMG_20210613_123557214.jpg
    304 KB · Views: 138
  • IMG_20210613_121304573.jpg
    IMG_20210613_121304573.jpg
    297.8 KB · Views: 131
  • IMG_20210613_123550499.jpg
    IMG_20210613_123550499.jpg
    436.5 KB · Views: 131
   / Why is my T/M cooler covered in oil and dirt? XR4150HC #22  
It's available from LS or New Holland dealers. Here's a link for CNH: COOLER | #MT40323120 | MSC-INTERCOOLER PTS | Misc Engines, Cooling & Exhaust | Engines, Cooling & Exhaust | Category | New Holland AG | MyCNHi US Store. My LS dealer quoted a price of $128, so I thought I was going to save a couple of bucks. However, after shipping and taxes, it was still $160.

The thing that changed between the two part numbers is the bracket on the side, not the cooler itself. You have to disconnect the hoses from the right angle adapters first. It's one of those deals where there's no space and you have to turn the nut 3 degrees over and over and over again. I had to remove the flange on the left side of the radiator after removing the coolant reservoir to have room to pull it out. You'll need to take off the right angle adapters and move them to the new unit. They use a compressible o-ring to seal on the cooler.

BTW, my dealer checked with LS who denied warranty coverage.
Thank you for the help!
 

Tractor & Equipment Auctions

UNUSED JCT 72" HYD VIBRATORY ROLLER (A54757)
UNUSED JCT 72" HYD...
2015 Ford F-350 Dump Truck (A51692)
2015 Ford F-350...
UNUSED LANDHONOR LHR-MS0810 METAL SHED (A54757)
UNUSED LANDHONOR...
SCAN FOR HAULING AND FINANCING INFORMATION (A52706)
SCAN FOR HAULING...
2001 AMADAS 2100 LOT NUMBER 251 (A53084)
2001 AMADAS 2100...
UNUSED FUTURE SG45 - 45" HYD STUMP GRINDER (A54757)
UNUSED FUTURE SG45...
 
Top