will this work

/ will this work #1  

kohlburner

New member
Joined
Jun 10, 2013
Messages
2
Location
troy,mo
Tractor
1951 farmall c
Found a 2 point fast hitch that came off a 350 farmall. Wanting to buy it to put on my c farmall. Will it bolt up or are they different?
 
/ will this work #2  
If I remember correctly we had a set of shims, about 1/4x1x16 that slipped into the 450 receiver when we put the super C equipment on it. Although that doesn't answer your question :)....
 
/ will this work #3  
I am reasonably sure that the mounting dimensions are different. The 350 is from the 'H' family so it has a heavier rear end housing, same as the 450 I think.
You could probably make it work, but it will require some modifications.
 

Marketplace Items

2022 John Deere Z720E Zero Turn (A63116)
2022 John Deere...
24220 (A56859)
24220 (A56859)
UNUSED WOLVERINE BC-13-72W 72" HYD BRUSH CUTTER (A62131)
UNUSED WOLVERINE...
UNUSED WOLVERINE PFF3-13-45W UNIVERSAL MAST (A62131)
UNUSED WOLVERINE...
UNUSED (2) 3" HYD CYLINDERS (A62130)
UNUSED (2) 3" HYD...
Box of Transport Ratchet Straps (A59230)
Box of Transport...
 
Top