wiper repair on curtis cab on kubota L3400

[billpayer]

I have a similar setup. While holding the base of the wiper pull up on the arm at the hinge. This releases the clamping mechanism. The trick is to hold onto the base and lift up on the arm together.

Good luck!
billpayer

 

[94BULLITT]

Some wipers do need a puller to remove them but I don't know about that pin on this one. Have you looked up under it with a mirror?

 

[mjym]

push it all the way down and drill a hole and put a cutter pin and you wont have no more trouble that is what i did to mine no more trouble