Price Check wiring question

[Stelly1227]

I recently got a Belarus 250as. Well it wouldn't start it had to be pulled to start well it somked really bad. Well I put new rings on it. But anyways I'm wanting to fix and use only what I need. I was wondering if anyone knows how o wire up the fuel gauge. I have the factory gauge all I have to do is send power to the sensor and the. A wire back to the gauge or what do I have to do. Thanks

 

[Craig Clayton]

Stelly1227
I know nothing about Belarus other than I nearly bought one many years ago and it had to be pulled / bump started. The fuel gauge is probably simple level wiring so if you look at any 1960 /70 North American car setups it should be similiar in concept.
Craig Clayton

 

[nike]

You can pick up a universal fuel gauge and install it in your tank, It comes with a sending unit and gauge that are matched to each other. easy to install, I did it to mine and the new gauge works fine.. The wiring on the 250 looks like a mess, but is easy to follow, if you have the savy to wire a 3 way switch you will have no problem working on the 250.
I do have the wiring diagram, but you need a russian dictionary and good eyes to follow it :laughing:
I just take it one wire at a time......:thumbsup: