Woods BH80-X

[MotorSeven]

Wallace,

STOP IT!!!!

You are making me think......well....if i had one of those i could........ /forums/images/graemlins/crazy.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

RD

 

[wallace]

Hmmm.
Dig a foundation for a chicken coop for your Kioti to feed in.
Dig a hole to plant a tree so your Kioti can rest in the shade.
Dig a foundation for the new house that you will have to live in when your wife finds out you want to spend more money on your toy I mean tractor. /forums/images/graemlins/grin.gif

Sweet dreams /forums/images/graemlins/wink.gif

 

[BigDogues]

Is the BH80-X a good fit for a CK25 or would a 70 be better? I see the CK25's 20 PTO HP is at the bottom of the 80's power requirement.

 

[wallace]

The ck25 will run the bx80 without batting a eye.
Keep in mind we are running off the hydraulics of the tractor not the pto.
When you are talking pto hp that is what Woodswants to run their pto pump kit which is the mininum gal per min that they need to do what their spec say.

The mininum gpm on that backhoe is 6gpm.

Hope this helps you decision /forums/images/graemlins/grin.gif
Kiotis CK 25 and 30 has a gpm of 12 so there would be no reason to put a pto pump on a machine that has a greater gpm than 6gpm.

 

[BigDogues]

Thanks Rick,
For some reason that fact just didn't register with me when I was reading the specs on the hoe. /forums/images/graemlins/blush.gif

 

[Highbeam]

Gee thanks Wallace, your shipment beat the IRS.

Another handy thing about the PTO pump is that you don't have the hydro fluid cross contamination. But then the engine fan isn't cooling the BH hyrdro fluid either.

Does the woods BH subframe require removal of the 3ph arms?

 

[wallace]

No it does not, although some of my customers did want them taken off.

 

[450EXC]

I leave my 3 pt arms on with my woods hoe. I raise them just enough to touch the bottom of the rear frame. I do loose a little clearance there.

I have to be very careful not to hit the 3 pt lever by mistake and raise them into the hoe and bend everything, unless Rick knows a trick for this ?

 

[BigDogues]

Once you have them raised can't you close the valve down below the seat to keep them from moving accidently?

 

[Mavrik02]

Am I interested...???...hmmm...that depends on the trade in value of a slightly used BH75. /forums/images/graemlins/grin.gif