Work Site Pro PA30 Post Hole Digger

[CurlyDave]

WOW!

The coupler jenkinsph built arrived today, and it is great!

He knew I had it before I did. He sent me a message asking if I had gotten it and I said no. He said it should have been delivered, and told me to look tomorrow.

Well, when I told DW I was expecting a heavy package, she said: "Oh is that the thing in front of my car?" Turns out it had been delivered and she parked right in front of it.

It is safely in the garage right now and is going up to Oregon with me for some exercise over July 4.

Couldn't be better if John Deere himself had made it.

 

[jenkinsph]

Dave,

Thanks for the nice remarks.

Now lets hope it fits your backhoe and planetary.

 

[aa1981]

How much do you want....PA30, e-mail:mini668@ymail.com 416-882-8868 pi

 

[jenkinsph]

How much do you want....PA30, e-mail:mini668@ymail.com 416-882-8868 pi

I see this is your first post but it is hard to determine your intentions or the apparent question you are raising.

 

[Luke'sScreenName]

I know this is an old thread but was wander what y'all thought.
There is a reasonably priced used PA30 near me. Im in the market for a hydraulic PHD. The catch is my flow is 9.5gpm @ 2500psi. With this flow be painfully slow with my tractor?

 

[jenkinsph]

I know this is an old thread but was wander what y'all thought.
There is a reasonably priced used PA30 near me. Im in the market for a hydraulic PHD. The catch is my flow is 9.5gpm @ 2500psi. With this flow be painfully slow with my tractor?

Yes, it will be slow but if mounted on the backhoe or fel either way you have down pressure. Does not take many turns to sink most bits, may add a minute to a deep hole. I would still prefer the heavy hydraulic set up to a 3ph type.

 

[jenkinsph]

Just make sure the PA 30 in question is verified to be in good shape. I remember one poster getting a piece of junk and was not happy with it.

 

[Luke'sScreenName]

Just make sure the PA 30 in question is verified to be in good shape. I remember one poster getting a piece of junk and was not happy with it.

I do appreciate the input. Unfortunately, it has been a little while and no longer available.