OP
BloomingtonMike
Platinum Member
- Joined
- Jun 30, 2004
- Messages
- 788
- Tractor
- John Deere 3320
And a little more work.
Worked on the old welder a bit this weekend
- Thread starter BloomingtonMike
- Start date
- Views: 2732
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
BloomingtonMike:
The HF unit is for AC TIG. Rob is absolutely right. HF used with conventional stick, well, if there is any conductivity between you (as in body) and ground, you will become the electrode so to speak. It could be very unpleasant, maybe even fatal.
I have the HF unit on my AC/DC Lincoln gas unit. It's for TIG only.
I believe the later model Hobarts and maybe the Lincolns have a process switch for that use. Mine don't, they leave it to the operator. /forums/images/graemlins/grin.gif
The HF unit is for AC TIG. Rob is absolutely right. HF used with conventional stick, well, if there is any conductivity between you (as in body) and ground, you will become the electrode so to speak. It could be very unpleasant, maybe even fatal.
I have the HF unit on my AC/DC Lincoln gas unit. It's for TIG only.
I believe the later model Hobarts and maybe the Lincolns have a process switch for that use. Mine don't, they leave it to the operator. /forums/images/graemlins/grin.gif